как прошить n900

The next step is to flash the Mass Storage or the eMMC. The first few steps are identical to the way you would flash the firmware. If you are following on from the above and already have the command prompt open, you can directly proceed to step number 3.

The update will take about 3 minutes after which the N900 will reboot and display the Welcome screen with Regional settings.

You will see text similar to the one below on your PC.

flasher-3.5.exe -F RX-51_2009SE_2.2009.51-1_PR_COMBINED_MR0_ARM.bin -f -R"

I typed RX-51.bin because I had renamed the file earlier, otherwise it would have been: (this was the name of the latest firmware, the name may vary after a new firmware comes out)

flasher-3.5.exe -F RX-51.bin -f -R

Connect the USB cable while holding the ‘u’ key on the N900. Within an instant you will see a USB icon on the top right corner of the N900. Now leave the ‘u’ key.

cd "C:\ProgramFiles\maemo\flasher-3.5"

Change directory to the flasher’s program path by entering:

Open the Command Prompt by going to Start then Run and type cmd, then press Enter.

Make sure that the battery is fully charged and switch off the device.

Save bothВP to C:\ProgramFiles\maemo\flasher-3.5\. My suggestion is to rename them to something simple such as RX-51.bin for the firmware and R.bin for the eMMC, this will make typing the commands easier later on.

Also download the Vanilla eMMC image (.bin file) from the same page. It will look like “RX-51_2009SE_1.2009.41-1.VANILLA_PR_EMMC_MR0_ARM.bin”

Next, the latest firmware (.bin) file, it will look like “RX-51_xxxxx_ARM.bin”. You will need your IMEIВP number to access the downloads, it can be found on the box or by going to Settings > General > About Product.

and install the latest version of Maemo Flasher (e.g. maemo_flasher-3.5_2.5.2.2.exe). Since this is a command line application you will see no shortcut on the desktop or in the Program Files option under the Start menu.

Before we start, please note that this would be done using the command line interface, it may seem tricky but let me assure you that it is simply enough for anyone to accomplish.

There is no seemingly easy way to do this and I really hope Nokia is doing something about it. That being said, how do you go about accomplishing the task? The answer is to flash both the N900′s OS and the 32 GB mass memory. This can be done on a Mac, a Linux or a Windows machine. Since windows is the most popular OS, I will show you how to do this via Windows.

As I , unlike Nokia’s Symbian devices, the N900 does not have a code that you can enter to format the device and restore it to the factory state. However, if you like playing with software in the , chances are that sooner or later you will like a fresh start and want the N900 to be restored to the state in which you first picked it up.

How To Hard Reset The N900 To The Factory State

How To Hard Reset The N900 To The Factory State | The Handheld Blog